singe/thirdparty/bzip2/NEWS.md
2023-10-23 19:38:18 -05:00

468 lines
16 KiB
Markdown

# Bzip2 News
## 1.1.0 (unreleased)
### General Announcements
[Micah Snyder](https://gitlab.com/micahsnyder) is the new maintainer of Bzip2
for feature development (v1.1+).
The Bzip2 feature development project is hosted on GitLab and can be found at
https://gitlab.com/bzip2/bzip2
Bzip2 version 1.0 is being maintained by Mark Wielaard at Sourceware and can be
found at https://sourceware.org/git/?p=bzip2.git
### Changes
Build system changes:
* Instead of the historical Makefile, Bzip2 now comes with two supported build
systems (Meson and CMake).
Either of the supported ones should build a shared library as per modern
practices. Please see the file [COMPILING.md](COMPILING.md) for details.
Important note when compiling for Linux:
* The SONAME for libbz2 for version 1.0 was: `libbz2.so.1.0`
Some distros patched it to `libbz2.so.1` to be supported by libtool.
Others did not.
We had to make a choice when switching from Makefiles -> CMake + Meson.
So, the SONAME for libbz2 for version 1.1 is now: `libbz2.so.1`
Distros that need it to be ABI compatible with the old SONAME may either:
1. Use CMake for the build with the option `-D USE_OLD_SONAME=ON`.
This will build an extra copy of the library with the old SONAME.
2. Use `patchelf --set-soname` after the build to change the SONAME and
install an extra symlink manually: `libbz2.so.1.0 -> libbz2.so.1.0.9`
You can check the SONAME with: `objdump -p libbz2.so.1.0.9 | grep SONAME`
Other changes, fixes:
* Use `O_CLOEXEC` for `bzopen()`. (Federico Mena Quintero)
* Fix `mingw` compilation. (Marty E. Plummer, Dylan Baker)
* Fix Visual Studio compilation. (Phil Ross)
* Don't let `bzip2recover` overwrite existing output files by default.
(Colin Phipps)
### Special Thanks
* Julian Seward for ceding maintainership and providing lots of advice
and interesting anecdotes.
* Mark Wielaard for constructing a repository based on tarballs from
the original releases. For a different construction by Evan Nemerson, see
https://gitlab.com/bzip2/bzip2/issues/7
* Federico Mena Quintero for his maintainership of the project June 2019 -
June 2021. Federico picked up the project from Julian Seward. He coordinated
and contributed to a patching and modernization effort, completed in this
release.
* Erich Córdoba and Jordan Petridis for the Continuous Integration
infrastructure.
* Phil Ross for the Windows build fixes.
* Dylan Baker for the Meson infrastructure.
* Micah Snyder for the CMake infrastructure.
* Stanislav Brabec for an Autotools infrastructure, which
became the basis for the Meson/CMake ones.
* Jens Korte for fixing up the README.
* All the people who submitted distribution-specific patches.
## 1.0.8 (13 Jul 19)
* Accept as many selectors as the file format allows.
This relaxes the fix for CVE-2019-12900 from 1.0.7
so that Bzip2 allows decompression of `.bz2` files that
use (too) many selectors again.
* Fix handling of large (> 4GB) files on Windows. (Phil Ross)
* Cleanup of `bzdiff` script so it doesn't use any bash extensions.
(Led)
* Cleanup of `bzgrep` script so it handle multiple archives
correctly. (Kristýna Streitová)
* There is now a bz2-files test suite at
https://sourceware.org/git/bzip2-tests.git
## 1.0.7 (27 Jun 19)
* Fix undefined behavior in the macros `SET_BH`, `CLEAR_BH`, & `ISSET_BH`
with the shift-left operator (Paul Kehrer).
* `bunzip2`: Fix return value when combining `--test` (`-t`) and `-q`.
* `bzip2recover`: Fix buffer overflow for large `argv[0]`. (Ivana Varekova)
https://bugzilla.redhat.com/show_bug.cgi?id=226979
* CVE-2016-3189 - Fix use-after-free in `bzip2recover`. (Jakub Martisko)
https://bugzilla.redhat.com/show_bug.cgi?id=1319648
* CVE-2019-12900 - Make sure `nSelectors` is not out of range.
Found through fuzzing karchive. (Albert Astals Cid)
## 1.0.6 (6 Sept 10)
* CVE-2010-0405: Security fix. This was reported by Mikolaj Izdebski.
* Make the documentation build on Ubuntu 10.04
## 1.0.5 (10 Dec 07)
Security fix only. Fixes CERT-FI 20469 as it applies to bzip2.
## 1.0.4 (20 Dec 06)
Fixes some minor bugs since the last version, 1.0.3.
* Fix file permissions race problem (CAN-2005-0953).
* Avoid possible segfault in BZ2_bzclose. From Coverity's NetBSD
scan.
* 'const'/prototype cleanups in the C code.
* Change default install location to /usr/local, and handle multiple
'make install's without error.
* Sanitise file names more carefully in bzgrep. Fixes CAN-2005-0758
to the extent that applies to bzgrep.
* Use 'mktemp' rather than 'tempfile' in bzdiff.
* Tighten up a couple of assertions in blocksort.c following automated
analysis.
* Fix minor doc/comment bugs.
## 1.0.3 (15 Feb 05)
Fixes some minor bugs since the last version, 1.0.2.
* Further robustification against corrupted compressed data.
There are currently no known bitstreams which can cause the
decompressor to crash, loop or access memory which does not
belong to it. If you are using bzip2 or the library to
decompress bitstreams from untrusted sources, an upgrade
to 1.0.3 is recommended. This fixes CAN-2005-1260.
* The documentation has been converted to XML, from which html
and pdf can be derived.
* Various minor bugs in the documentation have been fixed.
* Fixes for various compilation warnings with newer versions of
gcc, and on 64-bit platforms.
* The BZ_NO_STDIO cpp symbol was not properly observed in 1.0.2.
This has been fixed.
## 1.0.2
A bug fix release, addressing various minor issues which have appeared
in the 18 or so months since 1.0.1 was released. Most of the fixes
are to do with file-handling or documentation bugs. To the best of my
knowledge, there have been no data-loss-causing bugs reported in the
compression/decompression engine of 1.0.0 or 1.0.1.
Note that this release does not improve the rather crude build system
for Unix platforms. The general plan here is to autoconfiscate/
libtoolise 1.0.2 soon after release, and release the result as 1.1.0
or perhaps 1.2.0. That, however, is still just a plan at this point.
Here are the changes in 1.0.2. Bug-reporters and/or patch-senders in
parentheses.
* Fix an infinite segfault loop in 1.0.1 when a directory is
encountered in -f (force) mode.
(Trond Eivind Glomsrod, Nicholas Nethercote, Volker Schmidt)
* Avoid double fclose() of output file on certain I/O error paths.
(Solar Designer)
* Don't fail with internal error 1007 when fed a long stream (> 48MB)
of byte 251. Also print useful message suggesting that 1007s may be
caused by bad memory.
(noticed by Juan Pedro Vallejo, fixed by me)
* Fix uninitialised variable silly bug in demo prog dlltest.c.
(Jorj Bauer)
* Remove 512-MB limitation on recovered file size for bzip2recover
on selected platforms which support 64-bit ints. At the moment
all GCC supported platforms, and Win32.
(me, Alson van der Meulen)
* Hard-code header byte values, to give correct operation on platforms
using EBCDIC as their native character set (IBM's OS/390).
(Leland Lucius)
* Copy file access times correctly.
(Marty Leisner)
* Add distclean and check targets to Makefile.
(Michael Carmack)
* Parameterise use of ar and ranlib in Makefile. Also add $(LDFLAGS).
(Rich Ireland, Bo Thorsen)
* Pass -p (create parent dirs as needed) to mkdir during make install.
(Jeremy Fusco)
* Dereference symlinks when copying file permissions in -f mode.
(Volker Schmidt)
* Majorly simplify implementation of uInt64_qrm10.
(Bo Lindbergh)
* Check the input file still exists before deleting the output one,
when aborting in cleanUpAndFail().
(Joerg Prante, Robert Linden, Matthias Krings)
Also a bunch of patches courtesy of Philippe Troin, the Debian maintainer
of bzip2:
* Wrapper scripts (with manpages): bzdiff, bzgrep, bzmore.
* Spelling changes and minor enhancements in bzip2.1.
* Avoid race condition between creating the output file and setting its
interim permissions safely, by using fopen_output_safely().
No changes to bzip2recover since there is no issue with file
permissions there.
* do not print senseless report with -v when compressing an empty
file.
* bzcat -f works on non-bzip2 files.
* do not try to escape shell meta-characters on unix (the shell takes
care of these).
* added --fast and --best aliases for -1 -9 for gzip compatibility.
## 1.0.1
* Modified dlltest.c so it uses the new BZ2_ naming scheme.
* Modified makefile-msc to fix minor build probs on Win2k.
* Updated README.COMPILATION.PROBLEMS.
There are no functionality changes or bug fixes relative to version
1.0.0. This is just a documentation update + a fix for minor Win32
build problems. For almost everyone, upgrading from 1.0.0 to 1.0.1 is
utterly pointless. Don't bother.
## 1.0
Several minor bugfixes and enhancements:
* Large file support. The library uses 64-bit counters to
count the volume of data passing through it. bzip2.c
is now compiled with -D_FILE_OFFSET_BITS=64 to get large
file support from the C library. -v correctly prints out
file sizes greater than 4 gigabytes. All these changes have
been made without assuming a 64-bit platform or a C compiler
which supports 64-bit ints, so, except for the C library
aspect, they are fully portable.
* Decompression robustness. The library/program should be
robust to any corruption of compressed data, detecting and
handling _all_ corruption, instead of merely relying on
the CRCs. What this means is that the program should
never crash, given corrupted data, and the library should
always return BZ_DATA_ERROR.
* Fixed an obscure race-condition bug only ever observed on
Solaris, in which, if you were very unlucky and issued
control-C at exactly the wrong time, both input and output
files would be deleted.
* Don't run out of file handles on test/decompression when
large numbers of files have invalid magic numbers.
* Avoid library namespace pollution. Prefix all exported
symbols with BZ2_.
* Minor sorting enhancements from my DCC2000 paper.
* Advance the version number to 1.0, so as to counteract the
(false-in-this-case) impression some people have that programs
with version numbers less than 1.0 are in some way, experimental,
pre-release versions.
* Create an initial Makefile-libbz2_so to build a shared library.
Yes, I know I should really use libtool et al ...
* Make the program exit with 2 instead of 0 when decompression
fails due to a bad magic number (ie, an invalid bzip2 header).
Also exit with 1 (as the manual claims :-) whenever a diagnostic
message would have been printed AND the corresponding operation
is aborted, for example
bzip2: Output file xx already exists.
When a diagnostic message is printed but the operation is not
aborted, for example
bzip2: Can't guess original name for wurble -- using wurble.out
then the exit value 0 is returned, unless some other problem is
also detected.
I think it corresponds more closely to what the manual claims now.
## 0.9.5d
The only functional change is to make bzlibVersion() in the library
return the correct string. This has no effect whatsoever on the
functioning of the bzip2 program or library. Added a couple of casts
so the library compiles without warnings at level 3 in MS Visual
Studio 6.0. Included a Y2K statement in the file Y2K_INFO. All other
changes are minor documentation changes.
## 0.9.5c
Changed BZ_N_OVERSHOOT to be ... + 2 instead of ... + 1. The + 1
version could cause the sorted order to be wrong in some extremely
obscure cases. Also changed setting of quadrant in blocksort.c.
## 0.9.5b
Open stdin/stdout in binary mode for DJGPP.
## 0.9.5a
Major change: add a fallback sorting algorithm (blocksort.c)
to give reasonable behaviour even for very repetitive inputs.
Nuked --repetitive-best and --repetitive-fast since they are
no longer useful.
Minor changes: mostly a whole bunch of small changes/
bugfixes in the driver (bzip2.c). Changes pertaining to the
user interface are:
allow decompression of symlink'd files to stdout
decompress/test files even without .bz2 extension
give more accurate error messages for I/O errors
when compressing/decompressing to stdout, don't catch control-C
read flags from BZIP2 and BZIP environment variables
decline to break hard links to a file unless forced with -f
allow -c flag even with no filenames
preserve file ownerships as far as possible
make -s -1 give the expected block size (100k)
add a flag -q --quiet to suppress nonessential warnings
stop decoding flags after --, so files beginning in - can be handled
resolved inconsistent naming: bzcat or bz2cat ?
bzip2 --help now returns 0
Programming-level changes are:
fixed syntax error in GET_LL4 for Borland C++ 5.02
let bzBuffToBuffDecompress return BZ_DATA_ERROR{_MAGIC}
fix overshoot of mode-string end in bzopen_or_bzdopen
wrapped bzlib.h in #ifdef __cplusplus ... extern "C" { ... }
close file handles under all error conditions
added minor mods so it compiles with DJGPP out of the box
fixed Makefile so it doesn't give problems with BSD make
fix uninitialised memory reads in dlltest.c
Summary:
* Compression speed is much less sensitive to the input
data than in previous versions. Specifically, the very
slow performance caused by repetitive data is fixed.
* Many small improvements in file and flag handling.
* A Y2K statement.
## 0.9.0c
Fixed some problems in the library pertaining to some boundary cases.
This makes the library behave more correctly in those situations. The
fixes apply only to features (calls and parameters) not used by
bzip2.c, so the non-fixedness of them in previous versions has no
effect on reliability of bzip2.c.
In bzlib.c:
* made zero-length BZ_FLUSH work correctly in bzCompress().
* fixed bzWrite/bzRead to ignore zero-length requests.
* fixed bzread to correctly handle read requests after EOF.
* wrong parameter order in call to bzDecompressInit in
bzBuffToBuffDecompress. Fixed.
In compress.c:
* changed setting of nGroups in sendMTFValues() so as to
do a bit better on small files. This _does_ effect
bzip2.c.
## 0.9.0b
Fixed a problem with error reporting in bzip2.c. This does not effect
the library in any way. Problem is: versions 0.9.0 and 0.9.0a (of the
program proper) compress and decompress correctly, but give misleading
error messages (internal panics) when an I/O error occurs, instead of
reporting the problem correctly. This shouldn't give any data loss
(as far as I can see), but is confusing.
Made the inline declarations disappear for non-GCC compilers.
## 0.9.0a
Removed 'ranlib' from Makefile, since most modern Unix-es
don't need it, or even know about it.
## 0.9.0
First version after 0.1pl2.
* Approx 10% faster compression, 30% faster decompression
* -t (test mode) is a lot quicker
* Can decompress concatenated compressed files
* Programming interface, so programs can directly read/write .bz2 files
* Less restrictive (BSD-style) licensing
* Flag handling more compatible with GNU gzip
* Much more documentation, i.e., a proper user manual
* Hopefully, improved portability (at least of the library)
------------------------------------------------------------------
This file is part of bzip2/libbzip2, a program and library for
lossless, block-sorting data compression.
bzip2/libbzip2 version 1.1.0 of 6 September 2010
Copyright (C) 1996-2010 Julian Seward <jseward@acm.org>
Please read the WARNING, DISCLAIMER and PATENTS sections in the
README file.
This program is released under the terms of the license contained
in the file LICENSE.
------------------------------------------------------------------