joeylib2/examples/scb/scb.c

// Part of JoeyLib, Copyright (c) 2026 Scott Duensing, under the MIT License.
// See LICENSE.md for license information.
// SPDX-License-Identifier: MIT
//
// SCB stress screen: the per-scanline palette under the heaviest load a
// program can reasonably put on it. Written for the ports that honour the SCB
// by reloading ONE hardware palette as the beam scans (the X68000's text-plane
// present, the Atari ST's Timer B), where every palette change is a deadline
// an interrupt has to meet. Portable C only: nothing here knows which port it
// runs on.
//
// All sixteen palettes are in use, and colour i of each palette differs from
// colour i of every other palette, so a line shown in the wrong palette shows
// the wrong colour everywhere but in colour 0 (black in every palette by
// library contract). Twenty 16-pixel vertical stripes run the full height,
// stripe s in colour s mod 16, so every line uses every colour.
//
// Colour i of palette p is $0RGB with red = p, green = i and
// blue = (p * 7 + i) mod 16.
//
// The SCB, in three zones:
//   lines   0- 63  a new palette every line: 0, 1, ... 15, four times over
//   lines  64-135  runs of irregular length: run k is 1 + (k * 5 mod 7) lines
//                  (1, 6, 4, 2, 7, 5, 3, repeating) in palette (k * 7 + 3) mod 16,
//                  the last run cut short by the zone's end
//   lines 136-199  two palettes alternating every line: 6 on even lines, 9 on
//                  odd ones
// Every boundary is a palette change, the frame wrap included (line 199 is
// palette 9, line 0 palette 0): 147 changes a frame, back to back for the 64
// lines of each outer zone. scripts/verify-x68000-scb.sh computes the same
// screen from the same rules -- change both together.
//
// Every pass of the loop redraws and presents the whole stage, so the palette
// reloads land while the present is streaming into video memory, and sets all
// sixteen palettes again -- to the same colours, so the picture never changes
// -- so a port that keeps per-band state rebuilds it every pass while the
// frame it describes is on screen. Typed characters are read and dropped, so a
// gate can keep the keyboard interrupt busy during the check; ESC exits.

#include <stdio.h>
#include <stdlib.h>

#include <joey/joey.h>

// ----- Constants -----

#define STRIPE_WIDTH        16u         // two bytes of a plane: whole-byte fills
#define STRIPE_COUNT        (JL_SURFACE_WIDTH / STRIPE_WIDTH)
#define COLOR_CHANNEL_MASK  0x0Fu
#define RED_SHIFT           8u
#define GREEN_SHIFT         4u
#define BLUE_PALETTE_STEP   7u

// Zone boundaries: [0, EVERY_LINE_END) changes every line,
// [EVERY_LINE_END, IRREGULAR_END) runs irregularly, the rest alternates.
#define EVERY_LINE_END      64u
#define IRREGULAR_END       136u
#define RUN_LENGTH_STEP     5u
#define RUN_LENGTH_SPAN     7u
#define RUN_PALETTE_STEP    7u
#define RUN_PALETTE_BASE    3u
#define EVEN_LINE_PALETTE   6u
#define ODD_LINE_PALETTE    9u

#define CODEGEN_DEFAULT     0u

// ----- Prototypes -----

static void buildPalettes(jlSurfaceT *screen);
static void buildScb(jlSurfaceT *screen);
static void drawStripes(jlSurfaceT *screen);
static bool escapeTyped(void);


// ----- Helpers (alphabetical) -----

static void buildPalettes(jlSurfaceT *screen) {
    uint16_t colors[JL_SURFACE_COLORS_PER_PALETTE];
    uint16_t pal;
    uint16_t col;
    uint16_t blue;

    for (pal = 0u; pal < JL_SURFACE_PALETTE_COUNT; pal++) {
        for (col = 0u; col < JL_SURFACE_COLORS_PER_PALETTE; col++) {
            blue        = (uint16_t)((pal * BLUE_PALETTE_STEP + col) & COLOR_CHANNEL_MASK);
            colors[col] = (uint16_t)((pal << RED_SHIFT) | (col << GREEN_SHIFT) | blue);
        }
        jlPaletteSet(screen, (uint8_t)pal, colors);
    }
}


static void buildScb(jlSurfaceT *screen) {
    uint16_t line;
    uint16_t run;
    uint16_t runLeft;
    uint8_t  runPalette;

    for (line = 0u; line < EVERY_LINE_END; line++) {
        jlScbSet(screen, line, (uint8_t)(line % JL_SURFACE_PALETTE_COUNT));
    }
    run        = 0u;
    runLeft    = 0u;
    runPalette = 0u;
    for (line = EVERY_LINE_END; line < IRREGULAR_END; line++) {
        if (runLeft == 0u) {
            runLeft    = (uint16_t)(1u + (run * RUN_LENGTH_STEP) % RUN_LENGTH_SPAN);
            runPalette = (uint8_t)((run * RUN_PALETTE_STEP + RUN_PALETTE_BASE) % JL_SURFACE_PALETTE_COUNT);
            run++;
        }
        jlScbSet(screen, line, runPalette);
        runLeft--;
    }
    for (line = IRREGULAR_END; line < JL_SURFACE_HEIGHT; line++) {
        jlScbSet(screen, line, (uint8_t)(((line & 1u) != 0u) ? ODD_LINE_PALETTE : EVEN_LINE_PALETTE));
    }
}


static void drawStripes(jlSurfaceT *screen) {
    uint16_t stripe;

    for (stripe = 0u; stripe < STRIPE_COUNT; stripe++) {
        jlFillRect(screen, (int16_t)(stripe * STRIPE_WIDTH), 0, STRIPE_WIDTH, JL_SURFACE_HEIGHT, (uint8_t)(stripe % JL_SURFACE_COLORS_PER_PALETTE));
    }
}


// Drain the typed-character queue; true if ESC was among them.
static bool escapeTyped(void) {
    int  ch;
    bool escape;

    escape = false;
    for (ch = jlInputGetChar(); ch >= 0; ch = jlInputGetChar()) {
        if (ch == JL_CHAR_ESCAPE) {
            escape = true;
        }
    }
    return escape;
}


int main(void) {
    jlConfigT   config;
    jlSurfaceT *screen;

    config.codegenBytes = CODEGEN_DEFAULT;
    config.noAudio      = true;
    if (!jlInit(&config)) {
        fprintf(stderr, "jlInit failed: %s\n", jlLastError());
        return EXIT_FAILURE;
    }
    screen = jlStageGet();
    buildScb(screen);
    for (;;) {
        drawStripes(screen);
        buildPalettes(screen);
        jlStagePresent();
        jlInputPoll();
        if (escapeTyped()) {
            break;
        }
    }
    jlShutdown();
    return EXIT_SUCCESS;
}