#!/usr/bin/env bash
# Part of JoeyLib, Copyright (c) 2026 Scott Duensing, under the MIT License.
# See LICENSE.md for license information.
# SPDX-License-Identifier: MIT
#
# verify-atarist-input.sh - Headless typed-character acceptance gate for
# the Atari ST port. Autostarts KEYS.PRG in Hatari (EmuTOS, GEMDOS
# drive), injects the RetroNet definition-of-done string through
# Hatari's command FIFO as IKBD key events, and reads the example's
# verification scanline back out of ST RAM with the built-in debugger.
# The row is planar (4 interleaved bitplane words per 16 pixels); the
# decode below reassembles the nibble pixels, which must equal the
# typed ASCII exactly.
#
# Injection encoding (Hatari 2.4 `hatari-event keypress <key>` parses a
# single-character argument as an ASCII character and a multi-character
# argument as an ST scancode): digits go as ASCII, '.' as scancode 52,
# and ':' as shift make (42) + ';' scancode 39 + shift break -- which
# also exercises the ISR's shift handling through the TOS keymap.
#
# Then the named keys the ST gives a second key for: the keypad's 8, 2, 4,
# and 6 as the arrows and its Enter as Return, each held alone (Hatari's
# keydown/keyup by scancode), and Up and the keypad's 8 held together with
# either let go first, which must leave Up down -- read off KEYS's row 4
# cells in ST RAM (scripts/lib/keysGate.sh; the cells' middles fall on a
# 16-pixel group's first pixel).
#
# Then KEYS again on German EmuTOS, whose Alt layer types @ [ ] on Alt with
# the keys U-umlaut, O-umlaut, and A-umlaut, and \ { } with Shift too; Alt
# with a letter types nothing, and a plain key goes on typing. And once more
# with the OS header made to say TOS 1.04 instead of EmuTOS (Hatari's
# debugger writes it before the boot): then the layer must come from
# src/atarist/stAltLayer.c's German table, found by the header's country,
# as on a German ST's own TOS, which keeps its layer out of Keytbl.
#
# Usage:   scripts/verify-atarist-input.sh
# Requires: hatari, the EmuTOS images (US and German),
#           build/atarist/bin/KEYS.PRG.
set -uo pipefail

repo=$(cd "$(dirname "${BASH_SOURCE[0]}")/.." && pwd)
source "$repo/scripts/lib/joeyEnv.sh"
source "$repo/scripts/lib/keysGate.sh"
joeyNeed HATARI hatari
joeyNeed EMUTOS_IMG emutos
joeyNeed EMUTOS_DE_IMG emutos
stScreenDump=$(joeyTool stScreenDump) || exit 1
bin_dir=$repo/build/atarist/bin
label=verify-atarist-input

target="192.168.1.10:6510"
# Alt with U-, O-, and A-umlaut (scancodes 0x1A, 0x27, 0x28), the same with
# Shift, Alt with A (nothing), then a plain 2 (an ASCII keypress).
deTarget='@[]\{}2'

[ -f "$bin_dir/KEYS.PRG" ] || { echo "$label: build KEYS.PRG first (make atarist)" >&2; exit 2; }

work=$(mktemp -d -t joeylib-st-input.XXXXXX)
cleanup() {
    joeyStop "${hatari_pid:-}"
    rm -rf "$work"
}
trap cleanup EXIT


send() {
    timeout 5 bash -c "echo \"\$1\" > \"$work/cmd.fifo\"" _ "$1" || return 1
    sleep 0.2
}


# hatariBoot TOS [HATARI-ARG...] -- KEYS in Hatari on that TOS image; sets
# hatari_pid and rowAddr, KEYS's verification row in ST RAM, once its A5A5
# sentinel is up.
# The video base is read from the shifter regs each attempt (planar
# sentinel = plane words 5000 A000 5000 A000).
hatariBoot() {
    local tos="$1"
    local i
    local base
    local addr
    local row
    shift
    joeyStop "${hatari_pid:-}"
    rm -f "$work/cmd.fifo"
    (cd "$work" && exec env SDL_VIDEODRIVER=dummy SDL_AUDIODRIVER=dummy "$HATARI" \
        --tos "$tos" \
        --harddrive "$bin_dir" \
        --gemdos-drive C \
        --auto 'C:\KEYS.PRG' \
        --cmd-fifo "$work/cmd.fifo" \
        --fast-forward on \
        "$@" \
        > "$work/hatari.log" 2>&1) &
    hatari_pid=$!
    for i in $(seq 1 30); do
        [ -p "$work/cmd.fifo" ] && break
        sleep 1
    done
    [ -p "$work/cmd.fifo" ] || { echo "$label: FAIL - hatari never created the FIFO" >&2; exit 1; }
    rowAddr=""
    for i in $(seq 1 45); do
        sleep 1
        send 'hatari-debug m $ff8201 4' || continue
        base=$(grep -E '^00FF8201:' "$work/hatari.log" | tail -1 | awk '{print $2 $4}')
        [ -n "$base" ] || continue
        addr=$(( (16#$base << 8) + 198 * 160 ))
        send "hatari-debug m \$$(printf '%x' "$addr") 8" || continue
        row=$(grep -E "^$(printf '%08X' "$addr"):" "$work/hatari.log" | tail -1)
        if echo "$row" | grep -qi "50 00 a0 00 50 00 a0 00"; then
            rowAddr=$addr
            return 0
        fi
    done
    echo "$label: FAIL - KEYS sentinel never appeared" >&2
    tail -10 "$work/hatari.log" >&2
    exit 1
}


# rowCheck TARGET -- KEYS's verification row must hold exactly TARGET.
rowCheck() {
    sleep 3
    send "hatari-debug m \$$(printf '%x' "$rowAddr") 160"
    sleep 2
    "$stScreenDump" keys "$work/hatari.log" "$rowAddr" "$1"
}


hatariBoot "$EMUTOS_IMG"

# Type the string: digits as ASCII characters, '.' as scancode 52,
# ':' as shift + scancode 39.
for c in 1 9 2; do send "hatari-event keypress $c"; done
send "hatari-event keypress 52"
for c in 1 6 8; do send "hatari-event keypress $c"; done
send "hatari-event keypress 52"
send "hatari-event keypress 1"
send "hatari-event keypress 52"
for c in 1 0; do send "hatari-event keypress $c"; done
send "hatari-event keydown 42"
send "hatari-event keypress 39"
send "hatari-event keyup 42"
for c in 6 5 1 0; do send "hatari-event keypress $c"; done
rowCheck "$target" || exit 1

# KEYS's row 4 cells (scripts/lib/keysGate.sh's steps): the middle row's
# address, and each cell's 16-pixel group (examples/keys: 28x26 cells 32
# and 30 apart from (2, 2)), whose first pixel is the cell's middle. The
# keys by their ST scancodes.
cellAddr=$((rowAddr - (198 - 135) * 160))
declare -A stScan=([up]=72 [kp8]=104 [kp2]=110 [kp4]=106 [kp6]=108 [kpenter]=114)
KEYS_LABEL=$label
keysPress() {
    send "hatari-event keydown ${stScan[$1]}"
}
keysRelease() {
    send "hatari-event keyup ${stScan[$1]}"
}
keysRead() {
    send "hatari-debug m \$$(printf '%x' "$cellAddr") 160"
    sleep 1
    "$stScreenDump" cells "$work/hatari.log" "$cellAddr"
}
KEYS_SETTLE_SECONDS=1
keysRunSteps kp8 kp2 kp4 kp6 kpenter
if [ -n "$KEYS_FAILS" ]; then
    echo "$label: FAIL - $KEYS_FAILS" >&2
    exit 1
fi

# altLayerType -- the Alt layer's keys, as deTarget says.
altLayerType() {
    send "hatari-event keydown 56"
    for c in 26 39 40; do send "hatari-event keypress $c"; done
    send "hatari-event keydown 42"
    for c in 26 39 40; do send "hatari-event keypress $c"; done
    send "hatari-event keyup 42"
    send "hatari-event keypress 30"
    send "hatari-event keyup 56"
    send "hatari-event keypress 2"
}


# German EmuTOS's Alt layer, from its Keytbl tables.
hatariBoot "$EMUTOS_DE_IMG"
altLayerType
rowCheck "$deTarget" || exit 1

# The same as TOS 1.04 would show it: "XXXX" over the header's "ETOS"
# (offset 0x2C) and version 0x0104 (offset 2), in the 512 KB ROM at
# 0xE00000.
printf 'w $e0002c $58 $58 $58 $58\nw $e00002 $01 $04\n' > "$work/tos104.dbg"
hatariBoot "$EMUTOS_DE_IMG" --parse "$work/tos104.dbg"
send 'hatari-debug m $e0002c 4'
sleep 1
if ! grep -qi "^00E0002C: 58 58 58 58" "$work/hatari.log"; then
    echo "$label: FAIL - the OS header still says EmuTOS: $(grep -i '^00E0002C:' "$work/hatari.log" | tail -1)" >&2
    exit 1
fi
altLayerType
rowCheck "$deTarget" || exit 1

echo "$label: PASS (typed \"$target\", all ${#target} chars arrived via jlInputGetChar; $KEYS_STEPS named-key steps: the keypad's arrows and Enter, Up held with its second key; German EmuTOS's Alt layer typed \"$deTarget\", from its tables and as TOS 1.04 from the built-in German one)"