; DVX Configuration
;
; Video mode selection.  The system picks the closest available VESA mode.
; Common resolutions: 640x480, 800x600, 1024x768
; Supported color depths: 8, 15, 16, 24, 32

[video]
width  = 1024
height = 768
bpp    = 16

; Mouse settings.
; wheel: normal or reversed
; wheelspeed: lines per wheel notch (1-10, default 3)
; doubleclick: double-click speed in milliseconds (200-900, default 500)
; acceleration: off, low, medium, high (default medium)
; speed: mouse travel needed per step of pointer movement (2-32, default 8;
;        lower = faster pointer)

[mouse]
wheel        = normal
wheelspeed   = 3
doubleclick  = 500
acceleration = medium
speed        = 8

; Shell settings.
; desktop: path to the desktop app loaded at startup
; welcome: program started after the desktop (the Welcome window shown at
;          the first start); it removes this line itself when you tick
;          "Don't show this again"

[shell]
desktop = apps/kpunch/progman/progman.app
welcome = apps/kpunch/welcome/welcome.app

; Network settings (TCP/IP through a packet driver loaded before DVX).
; dhcp: true = get the address from a DHCP server; false = use address,
;       netmask and gateway below
; dns1, dns2: name servers (empty = the DHCP server's)
; hostname: this computer's name on the network
; vector: packet driver interrupt, e.g. 0x60 (auto = search 0x60-0x80)

[network]
dhcp     = true
address  =
netmask  =
gateway  =
dns1     =
dns2     =
hostname = DVX
vector   = auto

; Printer settings (Control Panel's Printer page and File > Page Setup).
; port: LPT1, LPT2, LPT3 or FILE (print into the file named by file)
; model: text (any printer, text only), epson9, epson24 (Epson ESC/P
;        dot matrix) or laserjet (HP PCL); all but text print pictures
; linesPerPage: 0 = the printer's usual page length (66, laser 60)
; columns: characters across the page; margins in lines (top, bottom)
;          and characters (left, right)
; header, footer: &f file name, &p page, &n pages, &d date, &t time,
;          &l &c &r left / centre / right, && an ampersand

[printer]
port         = LPT1
file         = PRINTER.PRN
model        = text
linesPerPage = 0
columns      = 80
marginTop    = 3
marginBottom = 3
marginLeft   = 5
marginRight  = 5
tabWidth     = 8
wrap         = true
header       = &f
footer       = Page &p

; Sound settings.
; driver: auto (find the sound hardware), sb (Sound Blaster family),
;         speaker (PC speaker) or null (no sound)
; rate: mixing rate in Hz (4000-48000, default 22050); the sound card may
;       run slightly faster or slower
; bits, channels: 0 = the best the sound card can do, or 8 / 16 bits and
;       1 (mono) / 2 (stereo) to save work on a slow computer
; voices: sounds mixed at once (1-32, default 16); when more are started
;         the quietest stops
; volume: master volume in percent (0-100)
; speakerPcm: true = play sampled sound on the PC speaker (takes a lot of
;             the computer's time); false = tones only
; fmTones: true = square and triangle tones play on the music synthesizer
;          chip when there is one; false = always mixed
; midi: where MIDI music plays: auto (the synthesizer chip, else a
;       built-in synthesizer), mpu401 (an external synthesizer on the
;       MIDI port), fm (the chip) or software (the built-in synthesizer)
; mpuMode: what is on the MIDI port: gm (a General MIDI synthesizer),
;          mt32 (a Roland MT-32) or raw (send music unchanged)
; Optional: oplPort (default 388) and mpuPort (default 330), in hex;
; midiBank = the instrument bank file for MIDI music (OP2 format, path
; from the DVX folder; default libs\kpunch\music\genmidi.op2)
; The Sound Blaster's port, IRQ and DMA come from the BLASTER setting (for
; example SET BLASTER=A220 I5 D1 H5 in AUTOEXEC.BAT).

[audio]
driver     = auto
rate       = 22050
bits       = 0
channels   = 0
voices     = 16
volume     = 100
speakerPcm = false
fmTones    = true
midi       = auto
mpuMode    = gm

; Desktop sounds (Control Panel's Sounds page): the sound file (WAV or VOC)
; played for each event; empty = no sound.  A name alone is a file in the
; sound folders (your own in USER\SOUNDS first, then DVX's in
; SHARED\SOUNDS); a name with a folder in it is that file.
; default: the default beep (also message boxes without an icon)
; startup, exit: DVX starting and ending
; error, warning, question, information: message boxes of that kind
; windowOpen, windowClose: a window opening or closing (not dialogs)

[sounds]
default     = beep.wav
startup     = startup.wav
exit        = exit.wav
error       = error.wav
warning     = warning.wav
question    = question.wav
information = info.wav
windowOpen  =
windowClose =